Talk to a device on that bus independently of the IP core

General Discussion about MPD – anything that doesn't fit in the other MPD forums.
Post Reply
Posts: 1
Joined: April 6th, 2018, 8:55 am

Talk to a device on that bus independently of the IP core

Post by lingyueqing »

I have a single external I2C bus (SDA and SCL pins). This is currently controlled by a third-party IP core which provided "implicit" inout ports in the MPD, specifically:

I've hit a situation where I want to be able to talk to a device on that bus independently of the IP core (at a time when the IP core itself can be held in reset so that I know it cannot interfere). I've tried creating a separate axi_iic master and connecting it to the same external ports, but this doesn't work as it gets upset about multiple output drivers connected together.

So I think I need a simple I2C multiplexer as glue logic between the two masters, and I think I know how to do that in terms of the internal _I, _O, _T signals of each master, but I'm not sure how to "extract" those internal signals for the existing core given the MPD above (they are present in the underlying VHDL).
For the moment I've just manually modified the MPD file to expose these signals, but I was wondering if there's a better way to do this (either getting at the signals without changing the MPD file, or doing the whole I2C multi-master thing); while the manual edit is workable, the changes to the MPD file may get lost when the core is updated, so it's error-prone.

Another solution that I've considered (but I'm not sure if I like, though it's still possible since the Xilinx FPGA pinout isn't final yet) is to double-route the external bus (so the external SDA goes to two separate FPGA pins, one for the third-party core and one for the new core). This seems fairly ugly and wasteful though, but then I'm not an expert. :)
Post Reply