Page 1 of 1

Can not get the right response on find Artist

Posted: April 11th, 2021, 7:01 pm
by mdrenthen
Hello.

I'm writing a MPD module for Crestron.
The MPD software is running on a PI 2.
Client connection from Crestron to the PI works.
Play, stop, pause commands working also.
But...when i send a - find "(Artist == \"Queen\")" \n i got an ACK error message 'too few parameters for "find" -. There is a lot of Queen on the server so it had to find something ;-)
Is the syntax wrong? It's from the MPD documentation.
Can someone or some of you shine a light on this issue?

Re: Can not get the right response on find Artist

Posted: April 12th, 2021, 4:27 am
by max
Which MPD version?

Re: Can not get the right response on find Artist

Posted: April 12th, 2021, 5:13 am
by mdrenthen
I'm not Shure. It's installed with Rune Audio.

Re: Can not get the right response on find Artist

Posted: April 12th, 2021, 7:13 am
by max
Then I can't help you. You should ask Rune Audio for help - this is not a support site for Rune Audio, only for MPD.

Re: Can not get the right response on find Artist

Posted: April 12th, 2021, 7:15 am
by max
Oh look: https://www.runeaudio.com/download/
The latest release for Pi2 is already 5 years old. The last changelog entry (https://www.runeaudio.com/changelog/) is 7 years old!
Looks like Rune Audio is a dead project! Don't use it!

Here's RuneAudio's MPD package: https://github.com/RuneAudio/RuneOS/tre ... s/mpd-rune
It hasn't been touched for nearly 5 years. It not only uses an ancient unsupported MPD version, but also applies a patch which has been submitted but rejected by the MPD project due to code quality problems. So even if this was a recent supported MPD version, applying a badly coded patch would make it unsupported anyway.

If you want support from the MPD project, don't ever use Rune Audio.

Re: Can not get the right response on find Artist

Posted: April 12th, 2021, 8:21 am
by mdrenthen
Ah. Sorry about that. New to this.
Ik can delete Rune and install something better ? But what. Ik need the server to be controlled bij Crestron over TCP and webbased on the server if posdible. Ik think MPD is very good for this purpose.

Re: Can not get the right response on find Artist

Posted: April 13th, 2021, 8:02 am
by klassikmann
The original RuneAudio is seemingly dead. But the spin-off rAudio is very lively.
Look here: https://github.com/rern/rAudio-1

My configuration:
Hardware: Raspberry Pi 3 Model B Rev 1.2 + HifiBerry Digi+ Pro
OS: Archlinux 5.10.27 aarch64
MPD: 0.22.6